Non-Ion Water Treatment Polyacrylamide Anion and Cation Chemical Flocculant PAM

• Customization: Available
• CAS No.: 9003-05-8
• Formula: (C3h5no)N
• Model NO.: Polyacrylamide
• EINECS: 201-173-7
• Appearance: Granules
• Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Leather Auxiliary Agents, Water Treatment
• Color: White
• Solid Content(%): 88.5
• Business Type: Manufacturer
• Packaging: 25kg/Bag,500kg Bags
• Sample: Free Sample Support
• Transport Package: 25kg, 500kg,
• Specification: Granular
• Trademark: Lvyuan
• Origin: China
• HS Code: 3802109000
• Production Capacity: 10000tons /Year

Product Description

Non-Ion Water Treatment Polyacrylamide Anion and Cation Chemical Flocculant PAM

Introduction:

When using this Anionic PAM concentration should be controlled in 0.1-0.2%,do not use the equipment and matching dissolved dosing system,shell be equipped with dilution tank. The use of screw pump to add,the amount of adjustment according to the actual situation.

Item	Cationic
Appearance	White Granule Powder
Solid Content(%)	≥88.5
Molecular Weight(million)	7-18
Degree of Hydrolysis	5-60
Insoluble Matter(%)	≤0.2
Dissolution rate(Min)	40
Residual Monomer(%)	≤0.5

Application

1.Sludge dewatering agent :

Municipal and industrial wastewater treatment, activated sludge process.biochemical sludge is often highly hydrophilic colloidal organic content is high,it is difficult to.Cationic polyacrylamide treatment,less dosage,high dehydration efficiency,easy to separate.

2.Papermaking auxiliaries:

Effectively improve the paper strength ,reduce the loss of fiber and pulp , accelerate the filter of water , to enhance the retention and drainage effect . in the process of the process , there is an obvious good flocculation effect.

3.Treatment of Sewage and Organic Wastewater:

Alcohol wastewater , brewery wastewater , monosodium glutamate wastewater , sugar wastewater , meat factory wastewater , beverage factory wastewater , textile printing and dyeing wastewater generally with the negative charge , the treatment effect is higher than that of anionic , nonionic or inorganic salts of dozents of times .

4.Waterworks for River Water Sources:

As for river water tap water plant water treatment flocculating :its flocculating agent of cationic polyacrylamide is widely used in the Yellow River , Huaihe , along the Yangtze River and other rivers near water , the less dosage , good effect , low cost . Especially with inorganic flocculant , the effect is better .

5.Oilfield chemicals :

Thickener Used in Oilfield acidzing and clay anti swelling agent .
Our company technology commissioner respectively on the coal washing wastewater, mineral processing wastewater, dyeing wastewater, Protein purification wastewater, marble cutting wastewater, papermaking wastewter, sewage collection and beaker experiment, the sewage flocculatinon precipitation effect display of polyacrylamide.
Instructions:
1.Make up into a 0.2% concentration aqueous solution.
2.The general dosage is 0.1-10mg/L.
3.Fully dissolve. When dissolving, it is required to fully stir the water body and then slowly and evenly add the medicinal powder to prevent the blockage of pipes and pumps caused by large flocs and fish eyes.
4.The stirring speed is generally 200 rpm, the time is not less than 60 minutes, and the maximum temperature of the liquid medicine should be less than 60 degrees.
5.Select the dosage. Determine the dosage by experimentation before use. Because the dosage is too low, it will not work, and if the dosage is too high, it will have the opposite effect. When the concentration exceeds a certain concentration, PAM will not only not flocculate, but will be dispersed and used stably.
PACKAGE
Packing & Storage

25KG Kraft paper packing bag,or as orders.Dry powder product long exposure will absorb moisture,should be stored in a cool ventliated dry place,the effctive storage period 24 months
FACTORY:
Henan Lvyuan Water Treatment Technology Co., Ltd was esteblish in 2002 and specialized in the production of Activated Carbon, Polyaluminium Chloride(PAC), Polyacrylamide(PAM), abrasives and other water treatment chemicals.Our products are widely in domestic power, metallurgy, steel, water companies, paer mills, coal washing, textile, printing and dyeing, petroleum, electronics, pharmaceuticals, food, chemicals and urban water supply and drainage and other areas.
Customer Visit

Certifications:

FAQ

Feel free to contact us for factory price and customized solutions.

Our professional team are ready to service you 24/7. 

1. What superior advantages could I take?

• Factory price and technical support;
• Customized solution for product design and packaging;
• Fast delivery with large stock;

2. What is your business type?

• Manufacturer with export license;
• R&D drived company;
• Long-term relationship seeking and customer oriented;

3.How is the quality control in your factory?

We are factory for more than 20 years.Quality is always our priority, that is why we are still the leading company in this industry.

4. What types of payments do you accept?

We accept all types of payment, to reduce costs for our partner, we will make a decision together for the lowest cost and most convenience.