Apam Gel Hydrolyzed Polyacrylamide Hpam Cationic Anionic Polyacrylamide Powder

• Customization: Available
• CAS No.: 9003-05-8
• Formula: (C3h5no)N
• Model NO.: CPAM APAM NPAM
• EINECS: 201-173-7
• Appearance: Granules
• Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Leather Auxiliary Agents, Water Treatment
• Color: White
• Transport Package: 25kg, 500kg,
• Specification: Granular
• Trademark: Lvyuan
• Origin: China
• HS Code: 3802109000
• Production Capacity: 1000tons /Year
• Package Size: 110.00cm * 120.00cm * 120.00cm
• Package Gross Weight: 1010.000kg

Product Description

APAM Gel Hydrolyzed Polyacrylamide HPAM Cationic Anionic Polyacrylamide Powder

Product Description

 

Polyacrylamide (PAM) is a synthetic water-soluble polymer that has a wide range of applications in the oil and gas industry. In the oil field, PAM is used as a drilling fluid additive, a viscosity modifier, a friction reducer, and a flocculant.
1. Drilling fluid additive: PAM is added to drilling fluids to increase the viscosity and stability of the drilling fluid. It helps to prevent the loss of drilling fluid into porous formations and also helps to carry the cuttings to the surface.
2. Viscosity modifier: PAM can modify the viscosity of oil and water-based fluids. When added to an oil-based fluid, it can increase the viscosity and provide better lubricity. When added to a water-based fluid, it can decrease the viscosity and improve the fluid's flow properties.
3. Friction reducer: PAM can reduce the friction between the drilling fluid and the borehole wall. This helps to minimize the pressure required to circulate the fluid, which can lead to a reduction in the wear and tear on drilling equipment.
4. Flocculant: PAM is also used as a flocculant in the oil field. It helps to separate solids from liquids and can be used to remove suspended solids from produced water. This can help to reduce the environmental impact of oil production and make the produced water suitable for reuse.
In summary, PAM has many uses in the oil field and can help to improve the efficiency and environmental sustainability of oil and gas production.

Sepecification

OILFIELD EOR ANIONIC PAM

Products Name	Degree Of Charge	Molecular Weight	Applications
LY-A672	High	Super high	Resistant to the temperature of 75°Cand the salinity of solution of 30 000ppm
LY-A630S	High	High	Resistant to the temperature of 75°Cand the salinity of solution of 20 000ppm
LY-A730	High	High	Resistant to the temperature of 85°Cand the salinity of solution of 35 000ppm in high
LY-A672T	High	Super high
LY-A572T	High	Super high	Permeability reservoir

DRILLING FLUID PAM

Products Name	Degree Of Charge	Molecular Weight	Applications
LY-A320	Medium	Low	Shale inhibitor
LY-A530	Medium	Super high	Mud thickener
LY-A730	High	Super high

DRINKING WATER GRADE PAM

Products Name	Degree of charge	Molecular weight
LY-A220PWG	Low	Low
LY-A320PWG	Low	Medium low
LY-A430PWG	Medium	Medium
LY-A530PWG	High	High
LY-A630PWG	High	Medium

Precautions for use of polyacrylamide:

1. Powdered or granular polyacrylamide cannot be directly added to sewage. It must be dissolved in water before use, and then its aqueous solution shall be added to sewage in a certain proportion.

2. The water for dissolving products should be clean tap water,and the PH value of tap water can meet the requirements for preparing flocculant solution.
3. The water temperature should not exceed 60 ºC, normal temperature is enough.
4. The concentration of polyacrylamide PAM solution is generally 0.1~0.5%, that is, 15 grams of powder is added to 1 liter of water.
5. The prepared solution of polyacrylenamine should not be stored for more than one day for cationic PAM and two days for anionic PAM to avoid degradation.
6. Due to the poor shear performance of polyacrylamide, the product will be degraded after long time and high speed stirring,which will reduce its use effect. Generally, the stirring speed should be 60~120 rpm during dissolution.
7. In the process of dissolution, the speed of adding flocculant should be as slow as possible, and at the same time, it should be sprinkled into the water vortex slowly to prevent the flocculant particles from sticking together after entering the water.

Product Application

Application:

1.Sludge dewatering agent :

Municipal and industrial wastewater treatment, activated sludge process.biochemical sludge is often highly hydrophilic colloidal organic content is high,it is difficult to.Cationic polyacrylamide treatment,less dosage,high dehydration efficiency,easy to separate.

2.Papermaking auxiliaries:

Effectively improve the paper strength ,reduce the loss of fiber and pulp , accelerate the filter of water , to enhance the retention and drainage effect . in the process of the process , there is an obvious good flocculation effect.

3.Treatment of Sewage and Organic Wastewater:

Alcohol wastewater , brewery wastewater , monosodium glutamate wastewater , sugar wastewater , meat factory wastewater , beverage factory wastewater , textile printing and dyeing wastewater generally with the negative charge , the treatment effect is higher than that of anionic , nonionic or inorganic salts of dozents of times .

4.Waterworks for River Water Sources:

As for river water tap water plant water treatment flocculating :its flocculating agent of cationic polyacrylamide is widely used in the Yellow River , Huaihe , along the Yangtze River and other rivers near water , the less dosage , good effect , low cost . Especially with inorganic flocculant , the effect is better .

5.Oilfield chemicals :

Thickener Used in Oilfield acidzing and clay anti swelling agent.
Our company technology commissioner respectively on the coal washing wastewater, mineral processing wastewater, dyeing wastewater, Protein purification wastewater, marble cutting wastewater, papermaking wastewter, sewage collection and beaker experiment, the sewage flocculatinon precipitation effect display of polyacrylamide.

Packaging & Shipping

25kg/bag

1000kg/bag

Company Profile

 

Henan Lvyuan Water Treatment Technology Co., Ltd was esteblish in 2002 and specialized in the production of Polyaluminium Chloride(PAC), Polyacrylamide(PAM) and other water treatment chemicals.Our products are widely metallurgy, paer mills, coal washing, textile, printing and dyeing, petroleum, chemicals and urban water supply and drainage and other areas.